It has just been less than a year when Motorola launched the Moto E to target cost-sensitive markets worldwide. The phone became very popular because of it decent hardware offering at a very low price for a smartphone from a big brand. It is also the most successful Motorola phone till date. encouraged by its success, the company has now come with the 2nd generation Moto E with some hardware upgrades and more features at almost the same price.

The new Moto E is definitely one of best smartphones for its price available now. The device has been launched in two models: the one with 3G support and dual-SIM feature in select countries, and the other with 4G LTE support. The Moto E 2015 has a 4.5-inch IPS display, Qualcomm Snapdragon 200/410 processor, Quad-core 1.2 GHz Cortex CPU, 1GB RAM, 8GB storage and microSD slot with support up to 32GB, 5 MP rear and a front VGA sensor, 2390 mAh battery and so on. The phone comes with Android Lollipop out of the box.

The Moto E 2015 has started being sold through various online stores. since the phone has an unlockable bootloader, it has also received a working root method (with a few issue at the moment) and a custom recovery. The developer community would soon start pouring down custom ROMs, Kernels and mods for the device. In case you plan to root and flash stuff on your Moto E 2nd Gen, you might need to flash the stock firmware some day too.

Below, we got a detailed tutorial to help you with restoring your Moto E 2015 to stock easily. In case you decide to go official in future or recover your phone from a bootloop, you can use this guide.

Warning: We do not hold responsibility for the outcome of the procedure described below. follow the tutorial at your own risk!


Download Moto E 2015 stock firmware: Click here

Download and install the latest Motorola USB drivers on your computer.

Enable USB Debugging on your Moto E.

Download the minimal ADB and Fastboot tool:

Ensure decent battery level on your phone and backup your apps and data.

Restore Moto E 2015 to Stock

After you are done with the preparations described above, you can now proceed with flashing the stock firmware on your Moto E.

Unzip the firmware file with extension.

Now unzip, open the extracted folder and copy its files to the folder with firmware files.

Reboot your Moto E into the Bootloader Mode. You can do it using either of the methods given below:

Turn off your phone and then press and hold the volume Down + Power buttons simultaneously for a few seconds.

Connect your Moto G to the computer using the USB cable. open the firmware folder where you have copied the mfastboot files. launch a command window, type the following command and press the enter key:
adb reboot-bootloader

Now connect your Moto E to the computer via the USB cable provided by Motorola.

Open the folder with firmware files. place the mouse pointer at an empty space inside the folder and press shift key+Right-click on the mouse and launch a cmd prompt by selecting open command window here option.

When the command window is launched, issue the following commands and press the enter key:
mfastboot oem fb_mode_set
mfastboot flash partition gpt.bin
mfastboot flash bootloader bootloader.img
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash system system.img_sparsechunk.3
mfastboot flash system system.img_sparsechunk.4
mfastboot flash system system.img_sparsechunk.5
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
mfastboot erase customize
mfastboot oem config carrier vzw
mfastboot oem fb_mode_clear

In case you want to re-lock the bootloader after flashing the stock firmware, use the following command:
mfastboot oem lock

Now reboot your Moto E 2nd Gen by typing this command:
mfastboot reboot

If your phone refuses to boot properly and gets stuck in a bootloop, enter the Bootloader mode by holding volume Down+Power buttons, launch the command window and type the following command:
mfastboot erase cache
mfastboot erase userdata

mfastboot reboot

Your phone will reboot again and it should boot properly now. You have successfully restored your Moto E to the stock firmware!

Credits: Lucas Eugene

Leave a Reply

Your email address will not be published. Required fields are marked *